Description
Thread Adapters for Mechanical Pressure Switches:
Products by Category
Products by Industry
■ Thread adapters stainless steel (1.4305 / AISI 303)
■ Thread adapters zinc-plated steel (CrVl-free)
■ Adapter Aluminum)
Thread Adapters for Mechanical Pressure Switches:
■ Packard MetriPack 280® Connector
■ Overpressure safety: Up to 8,700 psi
■ Field-adjustable pressure range: 725 to 2,175 psi
■ SPST-NO or SPST-NC
■ Overpressure safety: Up to 4,350 psi (300 bar)
■ Field-adustable pressure range: 1.45 to 2,175 psi
■ Zinc-plated steel body
■ SPST-NO or SPST-NC
■ Field-adjustable pressure range: 1.45 to 2,175 psi
■ Overpressure safety: Up to 8,700 psi (600 bar)
■ Zinc-plated steel body
■ M12x1 DIN EN 61706-2-101A Connector
■ Overpressure safety: Up to 4,350 psi
■ Field-adjustable pressure range: 4.35 to 1,450 psi
■ Ceramic Sensor in Thick Film Technology
■ NO (Normally Open), PNP set point, field adjustable
■ High Overpressure Protection (Up to 2 x)
■ Flush Diaphragm Pressure Transducer
■ 4-20mA two-wire output
■ Pressure ranges to 400 bar (5,800 psi)
■ 1/2″ BSP flush diaphragm
■ NO (Normally Open), PNP set point, field adjustable
■ Ceramic Sensor in Thick Film Technology
■ High Overpressure Protection (Up to 2 x)
■ License free radio transmission up to 650 ft (200 meters)
■ Battery powered or 8-30 vdc supply
■ Pressure ranges 0-500 mbar to 0-1500 bar (0-7.5 psi to 0-20,000 psi)