■ Power Capacity: Up to 10 kW wind turbines
■ Engagement RPM: Approximately 150 – 300 RPM
■ Braking Torque: Up to 600 Nm
■ SPST-NO or SPST-NC
■ Overpressure safety: Up to 4,350 psi (300 bar)
■ Burst pressure safety: Up to 5,800 psi (400 bar)
■ Zinc-plated steel body
■ Deutsch DT04-3P Connector
■ Overpressure safety: Up to 1,450/5,801 psi
■ Field-adjustable pressure range: 4.35 to 1,450 psi
■ Deutsch DT04-3P Connector
■ Overpressure Safety: Up to 4,350 psi
■ Field-adjustable pressure range: 1.45 to 725 psi
■ Pressure range: 0–500 psig, suitable as a low-pressure oxygen pressure gage
■ NSN 6685-00-527-6156
■ Pressure Gage to AN6026-1B and MIL-DTL-6019E
■ Diaphragm & Piston Pressure Switch
■ Switching point continuously adjustable by turning knurled screw whilst system in operation
■ Overpressure safety up to 8,700 psi (600 bar)
■ Aluminum Housing
■ Diaphragm & Piston Pressure Switches with female 1/4 BSPP thread
■ Field-Adjustable Pressure Range: 7.25 to 5,800 psi
■ Overpressure Safety: Up to 8,700 psi (35 bar)
■ Aluminum Housing
■ AMP Junior Timer® Connector for easy plug-in electrical connection
■ Overpressure Safety: Up to 4,350 psi
■ Withstands high-pressure wash and immersion with IP67 and IP6k9k protection
■ Field-adjustable pressure range: 1.45 to 725 psi
■ Zinc-plated Steel Pressure Switch
■ Overpressure safety: Up to 4,350 psi (300 bar)
■ Diaphragm pressure switch
■ Brass Body (HEX 24mm / 0.95″)
■ SPST-NO or SPST-NC configuration options
■ Overpressure safety: Up to 500 psi (35 bar)
■ Wide range of pressure ranges to 200 bar DP
■ Gauge reference and bi-directional measurement options available
■ High accuracy across a wide differential pressure range
■ Field-adjustable pressure range: 4.35…1,450 psi
■ Socket device similar to DIN EN 175301
■ Made of zinc-plated steel
■ Overpressure safety: Up to 5,801 psi (up to 400 bar)
■ For pressure transmitters with 4 – 20mA current output
■ Suitable for pressure, temperature, level, force or flow indication
■ Connection to DIN EN 175301-803-A (DIN 43650)
■ 4-20mA two-wire output
■ Pressure ranges available to 1,000 bar (15,000 psi)
■ Submersion to 3,000 meters (10,000 ft) depth
■ Electromagnetic brakes
■ Torque: 1 Nm – 280 Nm
■ Bore: Ø 52 – 270 mm
■ Speed range: 2,000 – 10,000 RPM
■ Electromagnetic Clutch without bearing support
■ Torque Range: 1 Nm – 280 Nm
■ Speed Range: 2,000 to 10,000 RPM.
■ Electromagnetic clutch with bearing support
■ Torque Range: 4.5 Nm – 280 Nm
■ Bore: Ø 52 – 270 mm
■ Menu-controlled Electronic Pressure Switch
■ Field-Adjustable Pressure Range: 0 to 5,800 psi
■ Programmable Using Key-Pad
■ Overpressure Safety: Up to 7,250 psi
■ 2-NPN Outputs (Low-Side)
■ Normally Closed (NC)/ Normally Closed (NC)
■ High Output Current: Up to 500 mA
■ Electronic Pressure Switch w/ SOS Sensor
■ 2-NPN Outputs (Low-Side)
■ Normally Open (NO)/ Normally Closed (NC)
■ High Output Current: Up to 500 mA
■ High Durability Even with High Pressure Ramp Rates